Injection Temperature Control Equipment Single Color One Side 380V 50HZ
Single Function Rapid Heating And Rapid Cooling Mold Temperature Controller Specification
| Item | Unit | JD-S-60 |
| Power source | V | 380V；50HZ |
| Total power | KW | 65 |
| heating power | KW | 2.2 |
| cooling power | KW | 3 |
| Flow rate of cooling pump | L/MIN | 67 |
| Flow rate of heating pump | L/MI N | 33 |
| inlet/outlet of cooling | MM | DN25 |
| Soften water connector | MM | DN25 |
| Diverter connector | | 8 in 8 out |
| Dimensions | MM | 1650*750*1500 |
| Min. Space Requirement | MM | 2050*750*1500 |
| Gross Weight | KG | 550 |
| Applicable Tonnage of injection machine | T | 50-300 |
| Machine Function | Applicable to single color RHCM Moulding process of injection machine |
| Optional Function | Remote failure monitoring and solving function |
How to choose a proper rapid heating and cooling machine?
When parts need rapid heating and cooling injection ;
Parts need one side high gloss only ;
Part flatness requirement is not very strict ;
make choice according to the tonage of injection moulding machine;
Select the corresponding specifications of single function rapid heating and cooling mold temperature controller.
Below machine , there is only one set of temperature output.
When parts need rapid heating and cooling injection ,and requires two sides high gloss ;
Part flatness requirement is strict ;
Requires different front and rear mold temperatures .
Requires high gloss dual-color injection ;
make choice according to the tonage of injection moulding machine;
Below photo ,there are two sets of temperature output ;
Front and rear mold temperatures can be adjusted independently ;
Can do high gloss mono color or dua-color injection.
Product
Product Tags:
|
|
Injection Temperature Control Equipment Single Color One Side 380V 50HZ Images
|
